Acetic acid 10% – Identification of Product Chemical Code: RLS-SOL-A01 to A02 Chemical Name: Acetic Acid 10% Solution Chemical Grade: Chemical Formula: C₂H₄O₂ Chemical Weight: 60.05 g/mol CAS No: 64-19-7 Chemical Synonyms: Acetic Acid Solution 10% Acetic acid 10% – Hazards Identification REACH No: 01-2119475328-30-XXXX Signal Word: Danger Supplemental Hazard Information: Additional Hazard Information: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Acetic acid 10% – Hazards statements H315 – Causes skin irritation. H320 – Causes eye irritation.Precautionary statements P280 – Wear protective gloves/protective clothing/eye protection/face protection. P305 P351 P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 – Immediately call a Poison center or doctor/physician. Acetic acid 10% – Composition of Chemical Chemical Formula: C₂H₄O₂ EC No 1272/2008: 01-2119475328-30-XXXX Acetic acid 10% – First Aid Measures General Advice: Consult a physician. Show this safety data sheet to the doctor in attendance. If: Inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. If: Skin Contact: Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a physician. If: Eye Contac: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If: Swallowed: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Important Symptoms: The most important known symptoms and effects are described in the labelling section. Immediate Medical Attention: No Data Available Acetic acid 10% – Firefighting Measures Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or Carbon Dioxide. Hazards Arising: Carbon Oxides Advice for Firefighters: Wear self-contained breathing apparatus for firefighting if necessary. Info for Firefighting: Use water spray to cool unopened containers. Acetic acid 10% – Accidental Release Measures Personal Precautions: Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. Enviromental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Method for Containment: Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations. Acetic acid 10% – Handling and Storage Personal Precautions: Avoid inhalation of vapour or mist. Keep away from sources of ignition – No smoking. Take measures to prevent the build up of electrostatic charge. Enviromental Precautions: Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Exposure Controls | Personal Protection Derived No Effect Level (DNEL) Workers | Application Area | Exposure Routes | Health Effect | Value Application Area Exposure Routes Health effect Value Workers Inhalation Acute local effects 25 mg/m³ Workers Inhalation Long-term local effects 25 mg/m³ Workers Skin contact Long-term local effects 10mg/kg BW/d Consumers | Application Area | Exposure Routes | Health Effect | Value Application Area Exposure routes Health effect Value Consumers Inhalation Acute local effects 25 mg/m³ Consumers Inhalation Long-term local effects 25 mg/m³ Predicted No Effect Concentration (PNEC) Compartment Value Soil 0,478 mg/kg Marine water 0,3058 mg/l Fresh water 3,058 mg/l Marine sediment 1,136 mg/kg Fresh water sediment 11,36 mg/kg Sewage treatment plant 85 mg/l Aquatic intermittent release 30,58 mg/l Engineering Controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Eye/Face Protection: Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU). Skin Protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Full contact Material: butyl-rubber Minimum layer thickness: 0,3 mm Break through time: 480 min. Material tested: Butoject® Splash contact Material: Nature latex/chloroprene. Minimum layer thickness: 0,6 mm Break through time: 32 min. Material tested: Lapren® Data source: KCL GmbH, D-36124, Test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. Body Protection: Complete suit protecting against chemicals. Flame retardant anti-static protective clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory Protection: Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multipurpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Physical and Chemical Properties Appearance: Clear, Colourless liquid Odour: No Data Available Odour Threshold: No Data Available pH: No Data Available Melting Point: Melting point/range: 4°C Boiling Point: 117 – 118°C at 1.013 hPa Flash Point: 40°C – closed cup Evaporation: No Data Available Flammability: No Data Available Upper/Lower Flammability or Explosive Limits: Upper explosion limit: 19.9% (V) Lower explosion limit: 4% (V) Vapour pressure: 15.2 hPa at 20°CVapour density: No Data Available Relative density: No Data Available Water solubility: Completely miscible Partition Coefficien: No Data Available Auto-ignition Temperature: No Data Available Decomposition Temperature: No Data Available Viscosity: No Data Available Explosive properties: No Data Available Oxidizing properties: No Data Available Other Safety Info: No Data Available Stability and Reactivity Reactivity: No Data Available Chemical Stability: Stable under recommended storage conditions. Possibility of hazardous reactions: No Data Available Conditions to Avoid: Avoid moisture, heat, flames and sparks. Incompatible Materials: Peroxides, Permanganates, e.g. Potassium Permanganate, Amines, Alcohols Hazardous Decomposition Products: No Data Available Toxicological Information Acute Toxicity: No Data Available Skin Corrosion/Irritation: No Data Available Serious Eye damage | Eye Irritation: No Data Available Cell Mutagenicity: No Data Available Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity: No Data Available Specific Target Organ Toxicity – Single Exposure: No Data Available Specific Target Organ Toxicity – Repeated Exposure: No Data Available Aspiration Hazard: No Data AvailableEcological Information Ecological Toxicity: No Data Available Ecological Persistence and degradability: No Data Available Bioaccumulative Potential: No Data Available Mobility in Soil: No Data Available Results of PBT and vPvB Assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Other Adverse Effect: No Data Available Disposal Considerations Waste Treatment Methods: Product: Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging: Dispose of as unused product. Transport Information UN Number: ADR/RID: 2790 IMDG: 2790 IATA: 2790 UN Shipping Hazard: ADR/RID: Acetic Acid solution IMDG: Acetic Acid solution IATA: Acetic Acid solution Transport Hazard Class: ADR/RID: 8 IMDG: 8 IATA: 8 Packaging Group: ADR/RID: II IMDG: II IATA: II Enviromental Hazards: ADR/RID: no IMDG Marine pollutant: no IATA: no Special Precautions: No Data Available Regulatory InformationSafety, Health and environmental regulations: This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. Chemical Safety Assessment: A Chemical Safety Assessment has been carried out for this substance. Additional Info: RTECS: Not available To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Disclaimer The information stated above is considered to be correct, but does not claim to be inclusive and shall only be used as a guideline. The information provided by this document is confirmed by our continuous updating of knowledge and adheres to the products appropriate safety precautions. It does not represent any guarantee of the product’s properties. RLS Chemicals and its Associates shall not be held accountable for any damage’s consequent of handling the above product
