0.6kW Kunda Solar Borehole Pump (600W, 70m Head)

0.6kW Kunda Solar Borehole Pump – 600W, 70m Head, DC Solar Pump Product Overview The Kunda 0.6kW Solar Borehole Pump is a 600W DC-powered water pumping solution designed for reliable borehole water extraction in off-grid and low-grid environments. Built for solar operation, it helps users access water without depending on fuel-powered pumping systems or unstable utility power. With a maximum head of 70 metres, this pump is suitable for moderate-depth boreholes, elevated storage tanks, livestock watering, small-scale irrigation, and domestic water transfer. In the Kenyan market, where consistent access to water and electricity can be a challenge, this pump offers a practical and energy-efficient solution for homes, farms, schools, and remote sites. Macire supplies the pump with technical guidance on sizing, solar matching, and installation requirements. Macire also supports product verification, delivery, and after-sales assistance to help customers achieve dependable field performance. ⭐ Genuine Product | Verified & Supported by Macire System Architecture & Configuration Pump Core System A DC solar submersible borehole pump designed to lift water using solar-generated power, typically through matched solar modules and a controller. Power Output & Performance Rated at 600W with a maximum head of 70m, suitable for medium-lift water transfer where solar efficiency and steady daytime pumping are required. Construction & Materials Typically built with corrosion-resistant pump housing, sealed motor construction, and submersible-grade components for borehole use. Control & Protection Usually paired with a solar pump controller offering dry-run protection, voltage regulation, overload protection, and stable motor starting. Macire recommends using the correct controller and cable sizing for best results. Technical Specifications Table Specification Details Product Type Solar borehole pump Brand Kunda Rated Power 0.6kW / 600W Pump Type DC submersible solar pump Maximum Head 70m Application Borehole water lifting and tank filling Recommended Power Source Solar panels with matching controller Installation Type Submersible borehole installation Typical Water Use Domestic, farm, livestock, irrigation support Operating Mode Daytime solar pumping Protection Controller-dependent dry-run / overload protection Build Material Corrosion-resistant metal and submersible-grade components Cooling Method Water-cooled during submersible operation Recommended Cable Sizing Based on borehole depth and current draw Typical operating range recommended by Macire Best matched to properly sized solar array and delivery pipework Key Features 600W solar-powered pumping capacity Maximum head of 70m for moderate-depth lifting Suitable for off-grid water supply applications Fuel-free operation with low running cost Ideal for borehole-to-tank water transfer Supports farm, domestic, and light commercial water needs Submersible design for cleaner and quieter operation Compatible with solar pumping controllers Lower maintenance than engine-driven alternatives Efficient daytime pumping when matched correctly Practical solution for remote Kenyan installations Macire support available for sizing, supply, and installation guidance Applications / Use Cases �� Homes – domestic water transfer to overhead tanks �� Farms – livestock watering and small irrigation systems �� Clinics – water supply in off-grid or backup setups �� Offices – rural compounds and staff facilities �� Workshops – water transfer for cleaning and utility needs �� Light commercial use – lodges, schools, and small production sites Installation & Engineering Notes Install only in a properly cased and clean borehole. Match the pump with the correct solar panel capacity and controller. Use suitable submersible cable and waterproof joints. Size delivery pipe according to depth and expected flow rate. Include dry-run and overvoltage protection through the controller. Ensure the borehole yield can support the pump’s water demand. Macire can guide on pump sizing, solar array matching, and installation setup. Care, Maintenance & Operations Inspect controller status and cable connections regularly. Keep solar panels clean for consistent pumping performance. Avoid sand-heavy or debris-contaminated water where possible. Check pipework and tank float controls periodically. Monitor water output for early signs of blockage or wear. Confirm borehole water level remains within safe operating conditions. Service seals, controller, and electrical connections as needed. Spares and technical support availability should be confirmed through Macire. Do’s & Don’ts ✅ Do’s Use the pump with the correctly sized solar array Install with a compatible controller and protection system Confirm borehole depth and static water level before installation Use proper pipe sizing and waterproof cable joints Mount panels in a clean, unshaded location Carry out periodic system checks Follow Macire guidance for setup and operation ❌ Don’ts Do not run the pump without proper controller protection Do not install in a borehole with excessive sand without mitigation Do not undersize the solar array Do not use damaged cables or poor joints Do not exceed the recommended lifting conditions Do not allow dry running where protection is absent Do not ignore falling flow performance or unusual controller alarms Compatibility Section Compatible with: Solar pump controllers Matched solar PV modules Borehole delivery pipes Water storage tanks and float switches Protection breakers and disconnects Pump cable kits Tank level control accessories Macire can also advise on compatible solar panels, cabling, mounting structures, and protection accessories. Performance / Runtime Table Head / Lift Condition Expected Performance 20m head Higher flow, depending on borehole yield and pipe size 40m head Moderate flow for tank filling and daily use 60m head Reduced flow with stable solar input required 70m head Maximum rated lift; flow will be lowest near this point Performance depends on installation, solar input, borehole yield, and load sizing as guided by Macire. Mini FAQ 1. Is this pump suitable for a 70m borehole? Yes, it is rated for up to 70m head, but actual suitability depends on borehole conditions, delivery distance, and required water volume. 2. Can it work fully on solar? Yes. It is designed for solar operation when paired with the correct solar panels and controller. 3. Does Macire help with installation guidance? Yes. Macire can advise on pump selection, solar matching, cable sizing, and general installation requirements. 4. Is it noisy? No. As a submersible solar pump, it runs much quieter than petrol or diesel pumping alternatives. 5. Is nationwide delivery available? Yes. Macire supports delivery across Kenya, subject to location and logistics arrangements. Why Buy From Macire Macire supplies genuine water pumping solutions for the Kenyan market.Every unit is verified before dispatch for the correct application category.Macire helps customers match pump size, head, and solar input properly.Technical guidance is available for installation planning and component selection.Nationwide delivery support is available across Kenya.Macire can assist with compatible accessories and protection devices.After-sales support is available for operational guidance and maintenance direction.Customers benefit from practical experience in solar, water, and equipment systems.Macire focuses on reliable supply, correct sizing, and long-term usability.You get a trusted Kenyan supplier committed to verified products and dependable support.