The 3″ Heavy Duty Clear Wired Suction Pipe (30 metres) is a reinforced PVC hose engineered for high-volume water suction and transfer applications. Designed with embedded spiral steel wire reinforcement, it maintains its structural integrity under strong vacuum pressure while remaining flexible for field installations. The transparent PVC construction allows easy monitoring of water flow, helping identify air leaks or debris during operation. With a 3-inch internal diameter, this hose supports substantial flow rates, making it ideal for diesel water pumps, petrol pumps, irrigation systems, and construction dewatering projects across Kenya. The 30-metre continuous length reduces joint connections, improving suction efficiency and minimizing leakage risks in large-scale operations. Macire supplies verified heavy-duty suction pipes and provides compatibility guidance for proper pump sizing and installation. ⭐ Genuine Product | Verified & Supported by Macire 4️⃣ SYSTEM ARCHITECTURE & CONFIGURATION Hose Construction Clear heavy-duty PVC body Embedded spiral steel wire reinforcement Smooth internal bore for efficient flow Structural Performance Designed for vacuum suction applications Resistant to collapse under high suction load Flexible for routing across uneven terrain Connection Interface Compatible with 3-inch pump inlets Suitable for heavy-duty hose clamps Works with diesel, petrol, and centrifugal pumps 5️⃣ �� TECHNICAL SPECIFICATIONS Specification Details Internal Diameter 3 inches Length 30 metres Material Reinforced Clear PVC Reinforcement Spiral Steel Wire Application Water Suction & Transfer Operating Type Vacuum Use Flow Capacity High Transparency Yes Recommended Use Irrigation & Construction Dewatering (as guided by Macire) 6️⃣ �� KEY FEATURES 3-inch internal diameter Extended 30-metre length Steel spiral reinforcement for vacuum strength Transparent body for flow monitoring High-volume water transfer capability Resistant to collapse under suction Reduced leakage risk due to fewer joints Durable outdoor performance Suitable for high-capacity pumps Macire pump compatibility guidance available 7️⃣ �� APPLICATIONS / USE CASES �� Large Irrigation Systems – Field and crop water supply�� Construction Sites – Trench and foundation dewatering�� Tank Filling & Drainage – Water storage systems�� River & Dam Pumping – Surface water extraction�� Commercial Water Transfer – Industrial yard applications 8️⃣ �� INSTALLATION & ENGINEERING NOTES Use reinforced 3-inch hose clamps Avoid sharp bends to maintain optimal flow Install a 3-inch foot valve if required Keep hose alignment as straight as possible Suitable for above-ground suction use Macire provides suction height and pump sizing guidance 9️⃣ �� CARE, MAINTENANCE & OPERATIONS Inspect wire reinforcement periodically Flush after muddy water applications Avoid dragging over sharp surfaces Store in shaded conditions Check clamp tightness before use Avoid prolonged UV exposure Clean internal bore when necessary Spare fittings available through Macire �� ⚠️ DO’S & DON’TS ✅ Do’s Do use correct 3-inch fittings Do secure clamps firmly Do inspect before operation Do maintain recommended suction height Do clean after slurry transfer Do consult Macire for pump matching ❌ Don’ts Do not use for high-pressure discharge Do not sharply bend or kink Do not exceed suction lift limits Do not operate without proper sealing Do not expose to open flames Do not drag excessively across rough terrain 1️⃣1️⃣ �� COMPATIBILITY SECTION Compatible with: 3-inch diesel water pumps 3-inch petrol water pumps High-capacity centrifugal pumps Foot valves and strainers Heavy-duty hose clamps Macire-supplied irrigation pump systems 1️⃣2️⃣ �� PERFORMANCE TABLE Pump Capacity Expected Performance 5–7HP Pump Strong irrigation output 7–10HP Diesel Pump Rapid construction dewatering Surface Pump Efficient tank transfer Commercial Pump Continuous high-flow operation Performance depends on pump horsepower, suction height, and installation setup as guided by Macire. 1️⃣3️⃣ ❓ MINI FAQ 1. Is 3-inch suitable for large irrigation farms?Yes, it supports high-flow irrigation systems. 2. Can it handle muddy water?Yes, for light to moderate slurry and surface water. 3. Does Macire supply compatible pumps?Yes, Macire provides matched 3-inch pump systems and fittings. 4. Is 30 metres suitable for suction use?Yes, within recommended suction height limits. 5. Is delivery available across Kenya?Yes. Macire delivers nationwide. 1️⃣4️⃣ �� WHY BUY FROM MACIRE Genuine heavy-duty suction pipes Verified quality before dispatch Pump compatibility consultation Kenya-wide delivery Technical installation guidance Access to fittings and accessories Support for irrigation and construction projects Reliable Kenyan supplier Professional quotation documentation After-sales support available Macire – Inspired Living. ✨
