The 2.5″ Heavy Duty Clear Wired Suction Pipe (30 metres) is a reinforced PVC hose designed for medium-to-high capacity water suction systems. Built with embedded spiral steel wire reinforcement, it maintains its structural shape under vacuum pressure while offering flexibility for field installations. The transparent PVC body allows visual monitoring of water flow, helping detect blockages or air leaks during operation. With a 2.5-inch internal diameter, this hose supports higher flow rates than smaller suction lines, making it suitable for irrigation pumps, diesel water pumps, petrol pumps, and surface water transfer systems. The 30-metre continuous length minimizes joint connections, improving suction efficiency and reducing potential leak points in large installations. Macire supplies verified heavy-duty suction pipes compatible with 2.5-inch pump systems and provides technical guidance on installation and pump matching. ⭐ Genuine Product | Verified & Supported by Macire 4️⃣ SYSTEM ARCHITECTURE & CONFIGURATION Hose Construction Clear heavy-duty PVC material Embedded spiral steel wire reinforcement Smooth inner bore for efficient water flow Structural Performance Designed for vacuum suction use Resistant to collapse under strong suction Flexible enough for terrain routing Connection Interface Compatible with 2.5-inch pump inlets Suitable for heavy-duty hose clamps Works with diesel, petrol, and centrifugal pumps 5️⃣ �� TECHNICAL SPECIFICATIONS Specification Details Internal Diameter 2.5 inches Length 30 metres Material Reinforced Clear PVC Reinforcement Spiral Steel Wire Application Water Suction & Transfer Operating Type Vacuum Use Flow Capacity Medium-High Transparency Yes Recommended Use Irrigation & Construction Dewatering (as guided by Macire) 6️⃣ �� KEY FEATURES 2.5-inch internal diameter 30-metre continuous length Steel spiral reinforcement for vacuum strength Transparent body for flow visibility Suitable for higher flow irrigation systems Maintains shape under suction load Reduced need for multiple hose joints Durable outdoor performance Compatible with medium-to-high capacity pumps Macire pump matching support available 7️⃣ �� APPLICATIONS / USE CASES �� Medium-to-Large Irrigation Projects – Field water distribution�� Construction Sites – Dewatering trenches and pits�� Tank Filling & Drainage Systems – Water storage transfer�� River & Dam Pumping – Surface water suction�� Commercial Water Transfer – Yard and industrial applications 8️⃣ �� INSTALLATION & ENGINEERING NOTES Secure with reinforced 2.5-inch hose clamps Avoid sharp bends or kinks Install a foot valve where required Keep hose as straight as possible for optimal suction Suitable for above-ground suction systems Macire provides suction height and pump compatibility guidance 9️⃣ �� CARE, MAINTENANCE & OPERATIONS Inspect reinforcement regularly Flush after muddy or sandy water use Store in a shaded, dry area Avoid dragging over sharp objects Check clamp tightness before operation Clean inner bore periodically Avoid prolonged UV exposure Fittings and accessories available through Macire �� ⚠️ DO’S & DON’TS ✅ Do’s Do use correct 2.5-inch fittings Do secure clamps tightly Do inspect before each use Do maintain recommended suction height Do clean after slurry transfer Do consult Macire for pump sizing ❌ Don’ts Do not use for high-pressure discharge Do not sharply bend or twist Do not exceed suction lift limits Do not operate without proper sealing Do not expose to open flames Do not drag excessively on rough terrain 1️⃣1️⃣ �� COMPATIBILITY SECTION Compatible with: 2.5-inch diesel water pumps 2.5-inch petrol water pumps Electric centrifugal pumps Foot valves and strainers Heavy-duty hose clamps Macire-supplied irrigation pump systems 1️⃣2️⃣ �� PERFORMANCE TABLE Pump Capacity Expected Performance 5HP Pump Strong irrigation flow 6–8HP Diesel Pump Efficient site dewatering Surface Pump Stable tank transfer Commercial Pump Continuous water supply Performance depends on pump horsepower, suction height, and installation setup as guided by Macire. 1️⃣3️⃣ ❓ MINI FAQ 1. Is 2.5-inch suitable for irrigation farms?Yes, it supports medium-to-large irrigation systems. 2. Can it handle muddy water?Yes, for light to moderate slurry applications. 3. Does Macire provide matching pumps?Yes, compatible pump systems and fittings are available. 4. Is 30 metres suitable for suction use?Yes, within recommended suction height limits. 5. Is delivery available across Kenya?Yes. Macire delivers nationwide. 1️⃣4️⃣ �� WHY BUY FROM MACIRE Genuine heavy-duty suction pipes Verified quality before dispatch Pump compatibility consultation Kenya-wide delivery Technical installation guidance Access to fittings and accessories Support for irrigation and construction projects Reliable Kenyan supplier Professional quotation documentation After-sales support available Macire – Inspired Living. ✨
